TELEMAC-MASCARET Forum :: Topic: Script to change DHI MIKE .mesh file to .t3s for import to Blue Kenue (2/2)

Welcome, Guest

Page:
1
2

TOPIC: Script to change DHI MIKE .mesh file to .t3s for import to Blue Kenue

Script to change DHI MIKE .mesh file to .t3s for import to Blue Kenue 1 year 4 months ago #41734

a.barton OFFLINE Moderator Posts: 520 Thank you received: 137	You're mesh seems to be imported correctly... Kindly, Alan
	The administrator has disabled public write access.

Script to change DHI MIKE .mesh file to .t3s for import to Blue Kenue 1 year 4 months ago #41735

Mustermann OFFLINE Expert Boarder Posts: 268 Thank you received: 4	Hi Alan, This was easy. Thanks a lot. Best, Clemens
	The administrator has disabled public write access. The following user(s) said Thank You: a.barton

Script to change DHI MIKE .mesh file to .t3s for import to Blue Kenue 1 year 4 months ago #41736

a.barton OFFLINE Moderator Posts: 520 Thank you received: 137	You're welcome Kindly, Alan
	The administrator has disabled public write access.

Script to change DHI MIKE .mesh file to .t3s for import to Blue Kenue 1 year 4 months ago #41737

a.barton OFFLINE Moderator Posts: 520 Thank you received: 137	As a side note; the co-ordinate system is NOT kept... buyer beware Kindly, Alan
	The administrator has disabled public write access.

Script to change DHI MIKE .mesh file to .t3s for import to Blue Kenue 1 year 4 months ago #41738

Mustermann OFFLINE Expert Boarder Posts: 268 Thank you received: 4	Thanks for the hint. A question regarding the "new" version of Blue Kenue. It can save files in .14 which could be used in e.g. SWAN, but is there a way to also define the boundary conditions for the mesh stored in .14 in Blue Kenue? Best, Clemens
	The administrator has disabled public write access.

Script to change DHI MIKE .mesh file to .t3s for import to Blue Kenue 1 year 4 months ago #41740

a.barton
OFFLINE
Moderator
Posts: 520
Thank you received: 137

On the topic of co-ordinate system...

BK 3.12.7 will not assign the Mike21 mesh's co-ordinate system and without opening the file, you won't know what it is.
BK 3.12.8 will also not assign the Mike21 mesh's co-ordinate system BUT you WILL be able to see the value of the string because it will appear in the MetaData tab

2022-12-08b_AddProjectionToMetadata_BK3.12.8-alpha.png

On the topic of boundary conditions for the mesh stored in .14 file, I'll have to look into that; not sure at the moment as I've never done anything with SWAN. If it's not described in the Reference Manual then I'll have to look at the source code...

Kindly,
Alan

The administrator has disabled public write access.

The following user(s) said Thank You: Mustermann

Script to change DHI MIKE .mesh file to .t3s for import to Blue Kenue 1 year 4 months ago #41742

a.barton OFFLINE Moderator Posts: 520 Thank you received: 137	If you have the appropriate values on the nodes in a mesh, you can save the mesh to Shewchuck Triangle Files (.node, .ele, *.bot). Maybe that could help you get closer to where you need to be... Kindly, Alan
	The administrator has disabled public write access.

Script to change DHI MIKE .mesh file to .t3s for import to Blue Kenue 1 year 3 months ago #41817

Serrer OFFLINE Moderator Posts: 700 Thank you received: 296	In my best English Peasant accent... "I'm not dead yet!!" Anyway... Unless Alan has some tricks up his sleeve, boundary condition editors for Swan, Adcirc, etc. are not implemented in Blue Kenue. Telemac CONLIM creation/editting was the only one we supported. Wishing you all health and happiness during this holiday season... Martin
	The administrator has disabled public write access.

Flat Threaded

Page:
1
2

Moderators: Serrer, a.barton

Forum

PRE/POST PROCESSORS

Blue Kenue

Script to change DHI MIKE .mesh file to .t3s for import to Blue Kenue

open TELEMAC-MASCARET The mathematically superior suite of solvers

Nav view search

Navigation

Search