Welcome, Guest
Username: Password: Remember me

TOPIC: Mesh in bluekenue

Re: Mesh in bluekenue 12 years 3 months ago #4990

  • c.coulet
  • c.coulet's Avatar
  • OFFLINE
  • Moderator
  • Posts: 3722
  • Thank you received: 1031
Hi
As you're in long/lat, 1°~ 70km
So choosing 0.01 al edge length means an edge of 700m.

Maybe it will be easier to work on a plane projection.
If it's not possible, take care to well adapt your bathymetric criterion and the default value

Regards
Christophe
The administrator has disabled public write access.

Re: Mesh in bluekenue 12 years 3 months ago #4991

  • fbatif
  • fbatif's Avatar
Ok thank you for the explanation, but I do not understand is the influence of the bathymetry value
The administrator has disabled public write access.

Re: Mesh in bluekenue 12 years 3 months ago #4992

  • Serrer
  • Serrer's Avatar
  • OFFLINE
  • Moderator
  • Posts: 719
  • Thank you received: 304
The reason the meshing process is so slow for you is because of the large number of points (281632) that you are supplying as density points. As each node in your new mesh is placed a the local edge length is interpolated (via ID) from the nearest neighbours in each quadrant.

You are also over constraining the meshing process with such a large number of points.

If the manual isn't clear enough then I suggest you download and experiment with a number of example meshes on our ftp site.

ftp://kenueftp.chc.nrc.ca/BlueKenue/ExampleMeshes

Cheers... Martin
The administrator has disabled public write access.

Re: Mesh in bluekenue 12 years 3 months ago #4998

  • fbatif
  • fbatif's Avatar
Hi Martin,
I was running Bluekenue on a linux virtual machine via wine ... I run TELEMAC under the linux machine and I wanted all the soft linked to TELEMAC installed under the same environment. I've installed bluekenue directly on the windows machine and it's faster.
Moreover the bathymetry file was very heavy, mush larger than the area of the mesh so I've reduce it and it's also faster.

I will experiment the examples,
Thanks!
François
The administrator has disabled public write access.
Moderators: Serrer, a.barton

The open TELEMAC-MASCARET template for Joomla!2.5, the HTML 4 version.