open TELEMAC-MASCARET The mathematically superior suite of solvers

hi everybody

please why my bleukenue (on linux ubuntu) don't show K : turbulent kinetic energy for k-ε model (J/kg), EPS: dissipation of turbulent kinetic energy (W/kg).


I can't open the file in fudaa prepro. this doesn't have an extension. even when I add an extension it show me only grid in fudaa.

what can I do please.

thanks

On Fudaa, you need to open the result file with POST.
That's what you were doing ?

Hi Nicogodet

For Fudaa, You're right, I didn't open it in POST, sorry I didn't know, now I do, and all is right.
For EPS and K I'll try the solution of Lux.

Are the variables EPS and K present in the 3D result file?
Perhaps you can edit the file with gedit and check if in the beginning you see the variables/units (it is a binary file and only some parts are humanely readable).

Probably you are not using K-epsilon model for the horizontal/vertical turbulence model?

Hello,

There is a script which I use a lot to get some basic information about a result file, run:
run_telfile.py scan name_of_result_file

In particular, you can have the number of nodes/elements, number of records with the time range and the number of variables written in the file, see below (TELEMAC-2D init example with k-epsilon model).

Hope this helps,

Chi-Tuan

---

$ run_telfile.py scan f2d_init.slf


Interpreting command line options
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

~> Generic info

- Title: Cas Test - 1ere mise en regime
- Date: 1900-01-01 00:00:00
- Format: SERAFIN
- Endianess: BIG_ENDIAN
- Precision: Single precision

~> Mesh info

- Number of dimensions: 2
- Element type: triangle
- Number of points: 2039
- Number of elements: 3780
- Number of points per element: 3
- Number of planes: 1

+> Coordinates

- X offset, Y offset = 0, 0
- X range [-224.27099609375, 1527.1429443359375]
- Y range [317.625, 635.9940185546875]

~> Parallel info

- No parallel information

~> Boundary info

- No boundary file given

~> Data info

- Number of records: 1
- Time range: [500.0, 500.0]
- Number of variables: 8
- Name: VELOCITY U Unit: M/S
- Name: VELOCITY V Unit: M/S
- Name: WATER DEPTH Unit: M
- Name: FREE SURFACE Unit: M
- Name: BOTTOM Unit: M
- Name: TURBULENT ENERG. Unit: JOULE/KG
- Name: DISSIPATION Unit: WATT/KG
- Name: VISCOSITY Unit: M2/S


My work is done

Hi everybody,
hi pham, hi lux,

Lux thanks I introduced the K-esp model and it worked.
Pham thanks I checked and every thing is good.

Thx for helps
Josias

Out of curiosity, can you see the result(s) in Blue Kenue? If not, please pass me a small result file demonstrating the issue so that I can investigate further.

Kindly,
Alan

Hi Alan,

Yes I can see results in Bluekenue as well as in Fudaa prepro. Thx pham, lux and nicogodet. Are you still interesting in seeing some results files?

If Blue Kenue is working as expected then I don't need to see the result(s). Thanks for following up

Kindly,
Alan