open TELEMAC-MASCARET The mathematically superior suite of solvers

Hello everyone,

I'm working on a study project about Sisyphe coupled with telemac.
Here is the error message :

ITERATION 0 TIME: 0.0000 S

SISYPHE COUPLED WITH: TELEMAC2D
TELEMAC2D INITIALIZED
THE LIQUID BOUNDARIES FILE CONTAINS
6 LINES WITH:
Q(1) Q(2)
USING STREAMLINE VERSION 7.3 FOR CHARACTERISTICS
unable to read the cmd header on the pmi context, Error = -1
.
Error posting readv, Une connexion existante a d¹ Ûtre fermÚe par lÆh¶te distant.(10054)

job aborted:
rank: node: exit code[: error message]
0: LAPTOP-C37Q1O0K: -1073740940: process 0 exited without calling finalize
_____________
runcode::main:
:
|runCode: Fail to run
|C:\opentelemac-mascaret\mpich2\bin\mpiexec.exe -localonly -wdir C:\opentelemac-mascaret\v8p0r0\examples\telemac2d\baxter\baxter_unsteady.cas_2024-02-01-21h54min16s -n 1 C:\opentelemac-mascaret\v8p0r0\examples\telemac2d\baxter\baxter_unsteady.cas_2024-02-01-21h54min16s\out_telemac2d.exe
|~~~~~~~~~~~~~~~~~~
|
|~~~~~~~~~~~~~~~~~~

Files attached : .cas sisyphe
Here is my hydrograph.liq file :
#Open boundary file created for T2D simulation;
#Baxter tutorial inflow hydrographs
#
T Q(1) Q(2)
s m3/s m3/s
0 566.3369318 11.32673864
7200 566.3369318 11.32673864
39000 3567.922671 102.6485689
70800 566.3369318 11.32673864
76200 566.3369318 11.32673864
99999 566.3369318 11.32673864

I would really appreciate some help.
Thank you very much !

Here is the full answer from the terminal

Running your simulation(s) :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



C:\opentelemac-mascaret\mpich2\bin\mpiexec.exe -localonly -wdir C:\opentelemac-mascaret\v8p0r0\examples\telemac2d\baxter\baxter_unsteady.cas_2024-02-01-23h06min29s -n 1 C:\opentelemac-mascaret\v8p0r0\examples\telemac2d\baxter\baxter_unsteady.cas_2024-02-01-23h06min29s\out_telemac2d.exe


Unable to open the HKEY_LOCAL_MACHINE\SOFTWARE\MPICH\SMPD\process\45944 registry key, error 5, AccÞs refusÚ.

MASTER PROCESSOR NUMBER 0 OF THE GROUP OF 1
EXECUTABLE FILE: C:\opentelemac-mascaret\v8p0r0\examples\telemac2d\baxter\baxter_unsteady.cas_2024-02-01-23h06min29s\A.EXE
LISTING OF TELEMAC2D

---

TTTTT EEEEE L EEEEE M M AAAAA CCCCC
T E L E MM MM A A C
T EEE L EEE M M M AAAAA C
T E L E M M A A C
T EEEEE LLLLL EEEEE M M A A CCCCC

2D VERSION V8P0 FORTRAN 2003

~^~^~^~^~^~^~^~^~^~^~^^~^~^~^~^~^~
~ ~
\ ' o '
/\ o \ o
>=)'> ' /\ '
\/ \ >=)'> ~
/ /\ \/
~ >=)'> / .
\/ )
/ (
~ ) )
} ~ ( ( (
{ ) ) )
} } . ( ( (
{ { /^^^^^^^^^^^^
^^^^^^^^^\ /
^^^^^^^^^

DIFFERENT NUMBER OF PARALLEL PROCESSORS:
DECLARED BEFORE (CASE OF COUPLING ?): 1
TELEMAC-2D : 0
VALUE 1 IS KEPT

********************************************
* LECDON: *
* AFTER CALLING DAMOCLES *
* CHECKING OF DATA READ *
* IN THE STEERING FILE *
********************************************

EXITING LECDON. NAME OF THE STUDY:

OPENING FILES FOR TELEMAC2D

*****************************
* MEMORY ORGANIZATION *
*****************************

READ_MESH_INFO: TITLE= newSelafin
NUMBER OF ELEMENTS: 157252
NUMBER OF POINTS: 80036

FORMAT NOT INDICATED IN TITLE

MXPTEL (BIEF) : MAXIMUM NUMBER OF ELEMENTS AROUND A POI NT: 9
MAXIMUM NUMBER OF POINTS AROUND A POINT : 9
CORRXY (BIEF):NO MODIFICATION OF COORDINATES

MESH: MESH ALLOCATED
POINT_TELEMAC2D: SECTIONS DEFINED IN THE SECTIONS INPUT FILE

*************************************
* END OF MEMORY ORGANIZATION: *
*************************************

LISTING OF SISYPHE

---

SSSS I SSSS Y Y PPPP H H EEEEE
S I S Y Y P P H H E
SSS I SSS Y PPPP HHHHH EEEE
S I S Y P H H E
SSSS I SSSS Y P H H EEEEE

VERSION V8P0 FORTRAN 2003

____
/^\ / -- )
/ | \ (____/
/ | | \ / /
/_|_|_|_/ /
| / /
__ __ __ | / /__ __ __
[ ]__[ ]__[ ]. / /[ ]__[ ]__[ ]
|__ ____/ /___ __|
| / .

---

) |
| / / / |
| / / / |
~~~~~~~~~~~~

---

~~~~~~~~~~~~~~~~~~

COUPLED WITH TELEMAC2D INTERNALLY

WARNING IN DICTIONARY:
FOR KEYWORD: VARIABLES FOR GRAPHIC PRINTOUTS
THE NUMBER OF DEFAULT VALUES 1 IS DIFFERENT FROM THE DECLARED SIZE 7

WARNING IN DICTIONARY:
FOR KEYWORD: C-VSM PRINTOUT SELECTION
THE NUMBER OF DEFAULT VALUES 1 IS DIFFERENT FROM THE DECLARED SIZE 13

THE KEY-WORD: BETA
APPPEARS AT LEAST TWICE , THE LAST VALUE WILL BE KEPT...

DIFFERENT NUMBER OF PARALLEL PROCESSORS:
DECLARED BEFORE (CASE OF COUPLING ?): 1
SISYPHE : 0
VALUE 1 IS KEPT

********************************************
* LECDON: *
* AFTER CALLING DAMOCLES *
* CHECKING OF DATA READ *
* IN THE STEERING FILE *
********************************************

OPENING FILES FOR SISYPHE

*******************************
* MEMORY ORGANISATION *
*******************************

READ_MESH_INFO: TITLE= newSelafin
NUMBER OF ELEMENTS: 157252
NUMBER OF POINTS: 80036

FORMAT NOT INDICATED IN TITLE

MXPTEL (BIEF) : MAXIMUM NUMBER OF ELEMENTS AROUND A POI NT: 9
MAXIMUM NUMBER OF POINTS AROUND A POINT : 9
CORRXY (BIEF):NO MODIFICATION OF COORDINATES

MESH: MESH_S ALLOCATED

*************************************
* END OF MEMORY ORGANIZATION: *
*************************************

INITIALIZING TELEMAC2D FOR
INBIEF (BIEF): NOT A VECTOR MACHINE (ACCORDING TO YOUR DATA)
STRCHE (BIEF): NO MODIFICATION OF FRICTION

THERE IS 3 LIQUID BOUNDARIES:

BOUNDARY 1 :
BEGINS AT BOUNDARY POINT: 1196 , WITH GLOBAL NUMBER: 45668
AND COORDINATES: 1966332. 624757.9
ENDS AT BOUNDARY POINT: 1235 , WITH GLOBAL NUMBER: 45013
AND COORDINATES: 1965825. 625344.9

BOUNDARY 2 :
BEGINS AT BOUNDARY POINT: 1776 , WITH GLOBAL NUMBER: 34473
AND COORDINATES: 1958439. 627339.8
ENDS AT BOUNDARY POINT: 1798 , WITH GLOBAL NUMBER: 34194
AND COORDINATES: 1958282. 627750.8

BOUNDARY 3 :
BEGINS AT BOUNDARY POINT: 2552 , WITH GLOBAL NUMBER: 60
AND COORDINATES: 1946882. 623257.2
ENDS AT BOUNDARY POINT: 2817 , WITH GLOBAL NUMBER: 2774
AND COORDINATES: 1948077. 618145.6

THERE IS 3 SOLID BOUNDARIES:

BOUNDARY 1 :
BEGINS AT BOUNDARY POINT: 2817 , WITH GLOBAL NUMBER: 2774
AND COORDINATES: 1948077. 618145.6
ENDS AT BOUNDARY POINT: 1196 , WITH GLOBAL NUMBER: 45668
AND COORDINATES: 1966332. 624757.9

BOUNDARY 2 :
BEGINS AT BOUNDARY POINT: 1235 , WITH GLOBAL NUMBER: 45013
AND COORDINATES: 1965825. 625344.9
ENDS AT BOUNDARY POINT: 1776 , WITH GLOBAL NUMBER: 34473
AND COORDINATES: 1958439. 627339.8

BOUNDARY 3 :
BEGINS AT BOUNDARY POINT: 1798 , WITH GLOBAL NUMBER: 34194
AND COORDINATES: 1958282. 627750.8
ENDS AT BOUNDARY POINT: 2552 , WITH GLOBAL NUMBER: 60
AND COORDINATES: 1946882. 623257.2
INITIALISATION ICURVE= 3
INITIALISATION ICURVE= 3

STAGE-DISCHARGE CURVE: 3

Q= 2.8319999999999999 Z= 7.2660000000000000
Q= 76.399000000000001 Z= 8.8300000000000001
Q= 149.96600000000001 Z= 9.5129999999999999
Q= 223.53299999999999 Z= 10.064000000000000
Q= 297.10000000000002 Z= 10.659000000000001
Q= 370.66800000000001 Z= 11.101000000000001
Q= 444.23500000000001 Z= 11.481999999999999
Q= 517.80200000000002 Z= 11.820000000000000
Q= 591.36900000000003 Z= 12.101000000000001
Q= 664.93600000000004 Z= 12.359999999999999
Q= 738.50300000000004 Z= 12.597000000000000
Q= 812.07100000000003 Z= 12.814000000000000
Q= 885.63800000000003 Z= 13.006000000000000
Q= 959.20500000000004 Z= 13.183000000000000
Q= 1032.7719999999999 Z= 13.340999999999999
Q= 1106.3389999999999 Z= 13.490000000000000
Q= 1179.9059999999999 Z= 13.628000000000000
Q= 1253.4739999999999 Z= 13.756000000000000
Q= 1327.0409999999999 Z= 13.871000000000000
Q= 1400.6079999999999 Z= 13.978000000000000
Q= 1474.1750000000000 Z= 14.079000000000001
Q= 1547.7420000000000 Z= 14.176000000000000
Q= 1621.3090000000000 Z= 14.271000000000001
Q= 1694.8770000000000 Z= 14.362000000000000
Q= 1768.4440000000000 Z= 14.451000000000001
Q= 1842.0110000000000 Z= 14.536000000000000
Q= 1915.5780000000000 Z= 14.618000000000000
Q= 1989.1450000000000 Z= 14.701000000000001
Q= 2062.7120000000000 Z= 14.779999999999999
Q= 2136.2800000000002 Z= 14.856000000000000
Q= 2209.8470000000002 Z= 14.929000000000000
Q= 2283.4140000000002 Z= 15.002000000000001
Q= 2356.9810000000002 Z= 15.071999999999999
Q= 2430.5479999999998 Z= 15.141999999999999
Q= 2504.1149999999998 Z= 15.212999999999999
Q= 2577.6830000000000 Z= 15.279999999999999
Q= 2651.2500000000000 Z= 15.343999999999999
Q= 2724.8170000000000 Z= 15.407999999999999
Q= 2798.3840000000000 Z= 15.468999999999999
Q= 2871.9510000000000 Z= 15.529999999999999
Q= 2945.5180000000000 Z= 15.587000000000000
Q= 3019.0859999999998 Z= 15.645000000000000
Q= 3092.6529999999998 Z= 15.699999999999999
Q= 3166.2199999999998 Z= 15.755000000000001
Q= 3239.7869999999998 Z= 15.810000000000000
Q= 3313.3539999999998 Z= 15.862000000000000
Q= 3386.9209999999998 Z= 15.914000000000000
Q= 3460.4890000000000 Z= 15.962000000000000
Q= 3534.0560000000000 Z= 16.010999999999999
Q= 3607.6230000000000 Z= 16.056999999999999
Q= 3681.1900000000001 Z= 16.106000000000002
Q= 4247.5270000000000 Z= 16.425999999999998
Q= 5663.3689999999997 Z= 17.056999999999999

CORFON (TELEMAC2D): 1 BOTTOM SMOOTHINGS

TITLE OF PREVIOUS COMPUTATION: FRASER RIVER HPG

NAME: VELOCITY U UNIT: M/S
NAME: VELOCITY V UNIT: M/S
NAME: WATER DEPTH UNIT: M
NAME: FREE SURFACE UNIT: M
NAME: BOTTOM UNIT: M
NAME: FROUDE NUMBER UNIT:
NAME: SCALAR FLOWRATE UNIT: M2/S

READ_DATASET : READ OF RECORD 11

TIME OF RECORD: 500.0000 S
ELAPSED TIME RESET TO ZERO
RESCUE : K AND EPSILON WILL BE SET AGAIN

================================================================================
ITERATION 0 TIME: 0.0000 S
TELEMAC2D COUPLED WITH: SISYPHE
TELEMAC-2D: INTERNAL COUPLING WITH SISYPHE
PART 0 : INITIALISING SISYPHE
INBIEF (BIEF): NOT A VECTOR MACHINE (ACCORDING TO YOUR DATA)

THERE IS 1 SOLID BOUNDARIES:

BOUNDARY 1 :
BEGINS AT BOUNDARY POINT: 1 , WITH GLOBAL NUMBER: 2800
AND COORDINATES: 1948091. 618108.2
ENDS AT BOUNDARY POINT: 1 , WITH GLOBAL NUMBER: 2800
AND COORDINATES: 1948091. 618108.2
STRCHE (BIEF): NO MODIFICATION OF FRICTION

INITIALISATION EN CAS DE COUPLAGE : PART= 0
QSCL REINITIALISED IN INIT_TRANSPORT
FOR CLASS 1
QS REINITIALISED IN INIT_TRANSPORT

================================================================================
ITERATION 0 TIME: 0.0000 S

SISYPHE COUPLED WITH: TELEMAC2D
TELEMAC2D INITIALIZED
THE LIQUID BOUNDARIES FILE CONTAINS
6 LINES WITH:
Q(1) Q(2)
USING STREAMLINE VERSION 7.3 FOR CHARACTERISTICS
unable to read the cmd header on the pmi context, Error = -1
.
Error posting readv, Une connexion existante a d¹ Ûtre fermÚe par lÆh¶te distant.(10054)

job aborted:
rank: node: exit code[: error message]
0: LAPTOP-C37Q1O0K: -1073740940: process 0 exited without calling finalize
_____________
runcode::main:
:
|runCode: Fail to run
|C:\opentelemac-mascaret\mpich2\bin\mpiexec.exe -localonly -wdir C:\opentelemac-mascaret\v8p0r0\examples\telemac2d\baxter\baxter_unsteady.cas_2024-02-01-23h06min29s -n 1 C:\opentelemac-mascaret\v8p0r0\examples\telemac2d\baxter\baxter_unsteady.cas_2024-02-01-23h06min29s\out_telemac2d.exe
|~~~~~~~~~~~~~~~~~~
|
|~~~~~~~~~~~~~~~~~~

It seems not related to TELEMAC2D, nor SISYPHE but it seems related to your MPI installation.

I strongly suggest to look at gitlab.pam-retd.fr/otm/wintel (which rely on msmpi instead of mpich).

I do not think it is related because it runs perfectly when I run a telemac2d simulation without coupling with sisyphe.

Thank you for your help.

Try to use a debug build and DEBUGGER=1 to raise a proper stacktrace and print faulty subroutine

Ok thank you, I tried, here is the message :




================================================================================
ITERATION 0 TIME: 0.0000 S
CALLING PRERES_TELEMAC2D
BACK FROM PRERES_TELEMAC2D
CALLING DESIMP FOR TELEMAC-2D
BACK FROM DESIMP
CALLING HPROPA
BACK FROM HPROPA
CALLING DE CHPCONV
BACK FROM CHPCONV
CALLING BILAN
BACK FROM BILAN
TELEMAC2D COUPLED WITH: SISYPHE
TELEMAC-2D: INTERNAL COUPLING WITH SISYPHE
PREMIER APPEL DE SISYPHE
INITIALIZATION
PART 0 : INITIALISING SISYPHE
APPEL DE LECLIM
END_LECLIM
INBIEF
INBIEF (BIEF): NOT A VECTOR MACHINE (ACCORDING TO YOUR DATA)
END_INBIEF
APPEL DE FRONT2

THERE IS 1 SOLID BOUNDARIES:

BOUNDARY 1 :
BEGINS AT BOUNDARY POINT: 1 , WITH GLOBAL NUMBER: 2800
AND COORDINATES: 1948091. 618108.2
ENDS AT BOUNDARY POINT: 1 , WITH GLOBAL NUMBER: 2800
AND COORDINATES: 1948091. 618108.2
RETOUR DE FRONT2
FONSTR
STRCHE (BIEF): NO MODIFICATION OF FRICTION

END_FONSTR
WRITE_HEADER
END_WRITE_HEADER
WRITE_MESH
END_WRITE_MESH
INITIALISATION EN CAS DE COUPLAGE : PART= 0
CONDIM_SISYPHE
END_CONDIM_SISYPHE
FREE SURFACE
END FREE SURFACE
VECTOR FOR VOLU2D
END VECTOR FOR VOLU2D
NOEROD
END NOEROD
INIT_SEDIMENT
END INIT_SEDIMENT
TOB_SISYPHE
END TOB_SISYPHE
INIT_TRANSPORT
QSCL REINITIALISED IN INIT_TRANSPORT
FOR CLASS 1
QS REINITIALISED IN INIT_TRANSPORT
END INIT_TRANSPORT

================================================================================
ITERATION 0 TIME: 0.0000 S

BIEF_DESIMP
END BIEF_DESIMP
SISYPHE COUPLED WITH: TELEMAC2D
END_INITIALIZATION
BACK FROM SISYPHE
TELEMAC2D INITIALIZED
CALLING CHPCONV
BACK FROM CHPCONV
CALLING HPROPA
BACK FROM HPROPA
CALLING PROPIN
BACK FROM PROPIN
CALLING CORSTR
BACK FROM CORSTR
IN FRICTION_CHOICE-INIT STEP
IN FRICTION_CHOICE-CALLING UNIF
IN FRICTION_CHOICE-BACK FROM UNIF
CALLING BORD
THE LIQUID BOUNDARIES FILE CONTAINS
6 LINES WITH:
Q(1) Q(2)
BACK FROM BORD
CALLING PROPIN
BACK FROM PROPIN
CALLING WALL_FRICTION
BACK FROM WALL_FRICTION
BOUCLE 701 ISOUSI= 1
CALLING CHARAC OPTION STRONG
USING STREAMLINE VERSION 7.3 FOR CHARACTERISTICS
BACK FROM CHARAC OPTION STRONG
CALLING PROSOU
BACK FROM PROSOU
CALLING PROPAG
BACK FROM PROPAG
TRAITEMENT BANCS DECOUVRANTS
FIN DU TRAITEMENT BANCS DECOUVRANTS
CALLING CHPCONV
BACK FROM CHPCONV
CALLING KEPSIL
BACK FROM KEPSIL
CALLING SISYPHE, CHARRIAGE
TIME_LOOP
CONDIM_SISYPHE
END_CONDIM_SISYPHE
CONLIT
unable to read the cmd header on the pmi context, Error = -1
.
Error posting readv, Une connexion existante a d¹ Ûtre fermÚe par lÆh¶te distant.(10054)

job aborted:
rank: node: exit code[: error message]
0: LAPTOP-C37Q1O0K: -1073740940: process 0 exited without calling finalize
_____________
runcode::main:
:
|runCode: Fail to run
|C:\opentelemac-mascaret\mpich2\bin\mpiexec.exe -localonly -wdir C:\opentelemac-mascaret\v8p0r0\examples\telemac2d\baxter\baxter_unsteady.cas_2024-02-02-11h42min48s -n 1 C:\opentelemac-mascaret\v8p0r0\examples\telemac2d\baxter\baxter_unsteady.cas_2024-02-02-11h42min48s\out_telemac2d.exe
|~~~~~~~~~~~~~~~~~~
|
|~~~~~~~~~~~~~~~~~~

Have you an idea of what the problem could be ?

Okay I think I found.
My simulation crashes at CONLIM, so I supposed the problem was from my boundary conditions. I openned my .cli file and changed the number of the column LIEBOR,LICBOR from 2 to 5 for inflow boundary and 4 for outflow boundary.
Now it runs.

Thank you for your help an i hope this will help.
Bye.